
ServicesWindow Replacement
Window Replacement in Carson
Before we talk about new windows, we look at the ones you have. We check the glass, frames, sills and the wall around each opening, then tell you plainly what we found. You decide what gets replaced and what can wait.
When a new window makes sense
Replacing a window means removing the old unit and fitting a new one in that opening. It is worth doing when the frame has bent, the seals are gone, or the window will not open, lock or stop drafts anymore. A sales pitch alone is not a reason.
Many local homes still have their first aluminum sliders with single-pane glass. Heat moves right through those frames, and the tracks wear down. New vinyl windows with dual-pane glass shut tight, operate more quietly and hold rooms nearer the temperature on your thermostat.
We hold a CSLB C-17 license, California's license for glazing work. If your windows have years of use left, we will tell you, and there will be no sales pitch.

What you get with the job
- 01
A check of each window
Every window on your list gets opened, shut and locked. We watch for soft wood, cracked stucco, water stains and bent tracks, and note each one.
- 02
Precise sizing
We measure every opening separately. Houses settle over time, so two windows that seem identical can differ by a quarter inch.
- 03
Tear-out and hauling
Old sashes, frames and glass come out and go away with us. No heap of aluminum is left sitting in your side yard.
- 04
Setting and sealing
Each new window is set level and square, shimmed, fastened and sealed to keep out water and air. Before we go to the next one, we make sure it slides and locks smoothly.
- 05
Finish work and cleanup
We finish the edges inside and out so the new window looks like it was always there. Floors stay covered during the work and get vacuumed at the end.
Questions about Window Replacement?
Call(310) 340-7107How to tell your windows are worn out
Cloudy glass you cannot wipe clean
A haze or moisture trapped between the two panes means the seal has broken. No amount of cleaning will clear it.
Sliders that drag or come off the track
Worn rollers and bent aluminum tracks make a window fight you. On older frames, replacement parts often are not made anymore.
Air leaks and rattles
Feel a breeze by a shut window, or hear it shake when a truck passes, and the frame has stopped sealing.
Water on the sill
Cold aluminum frames sweat, and that water runs onto sills and walls. Left alone, it brings peeling paint, mildew and soft wood.
A room that is always too hot or too cold
When one bedroom heats up every afternoon or chills every winter morning, single-pane glass is often the reason.
What happens from the first call to the last window
- 1
You call us
Tell us roughly how many windows you have in mind and what is wrong with them. We pick a time that works for you to come out.
- 2
We inspect
We go room by room, test each window and show you what we see. You get a written estimate that lists every window separately.
- 3
We order
After you choose your windows, we have them made to the measurements we took. When they arrive, we call to set your install date.
- 4
Install day
A typical job takes one day, a big order can take two. We pull out one window and set the new one before opening the next, so your rooms stay closed up, and we tidy as we work.
- 5
We check it with you
Together we slide and lock every new window. Anything that is off gets fixed before we pack up.
What sets the cost of your new windows
We do not quote a number until we have seen your windows in person. Your written estimate puts each window on its own line, so nothing is lumped together or hidden. These are the things that change the total most.
- Window size and style
- A small bathroom slider runs less than a wide picture window. Odd shapes and custom sizes take more to build.
- Glass choices
- Dual-pane glass is the base. Low-E coatings, tempered glass in spots where code calls for it, and frosted glass for bathrooms each add to the price.
- How the window goes in
- Some openings can take a retrofit unit that sits inside the old frame. Others need the whole frame pulled, which adds labor and stucco or trim patching.
- What we find around the opening
- Soft wood, damaged framing or cracked stucco must be fixed before a new window goes in. You hear about it at the inspection, not on install day.
- How many windows you order
- Setup and travel get split across more openings on a bigger order. That usually brings the cost of each window down.
Common questions about replacing windows
Is there a current deal on window replacement?
Yes. Window replacement for only $495 per window with free installation (minimum purchase of 4 windows per order; some glass size and product restrictions apply). At your estimate we will show you which of your windows qualify.
What if something goes wrong while you are installing?
You are covered. We are bonded and insured, with $2 million insurance coverage that protects your home and our crew for as long as we are working there.
Could I do a few windows now and finish later?
Of course. Many customers begin with the worst ones, such as a bedroom that gets too hot every afternoon or a slider that will not latch. We will point out which windows need work now and which can wait.
Will I be pressured to sign at the estimate?
No. Free in-home estimates come with no sales pressure or obligation. We explain what we found, put the numbers in writing and give you all the time you need.
Can you handle sliding doors too?
Yes. When a sliding glass door has the same worn tracks or broken seals as your windows, we can check it during the same visit. Our sliding door replacement page describes how that job goes.

Find out what your windows really need
We will look at every window, show you what we see and give you a written estimate. If replacement is not the answer yet, you will hear that from us too.